Installing differential bushings in an NA Miata Torsen differential. This differential came out of a The procedure should be the same for all NA and NB Missing: Bealeton VA. If you are doing a Torsen swap might as well upgrade your diff bushings. Popping out the old ones can be a bit of a job. Last set I used an air chisel and a Missing: Bealeton VA. Removing Miata differential bushingMissing: Bealeton VA. Jun 10, Jake, if the bushing in a Spec Miata & are not rotten or super soft why are you taking the bushings out?
I have a & they are the only bushings I didn't change.
I also have a back-up rear end completly assembled into the aluminum housing & I didn't change those bushings either. The bushing seem solid & hard, good to shrubdisposal.buzzted Reading Time: 7 mins.
This is 14 years old stock rubber bushing in Miata 97 control arm. The clip demonstrates removal process with home made tool. In other clips, I try to demons Missing: Bealeton VA. I am trying to remove my differential from my NB Miata. I’m now trying to remove the power plant frame from the diff. I’ve removed both of the large bolts. I have removed the top bushing by slightly screwing in the bolt and hammering upwards.
However, on the lower bushing, my troubles shrubdisposal.buzzg: Bealeton VA. I'm about to do the diff bushings and in Greg Peter's video he removes the 2 PPF bolts in the rear and then reinserts them and punches out the top sleeves but I'm hearing that it's not a good idea to do that, so how do I remove the rear diff? 8 comments.
share. save. shrubdisposal.buzzg: Bealeton VA. Sep 13, So I would like to install diff bushings in my Miata before the event on Sunday.
I've done a bit of research and it seems that most say you have to drop the rear lower control arms and remove the axles, I would like to avoid having to get the car realigned if possible. I feel like the job is rather lengthy as is and I know I am going to run Missing: Bealeton VA.