Call us to get tree helping like tree clearing, tree cutter, bush clean, shrub cutter, stump removal and plenty of other within United States


Call now

Call +1 (855) 280-15-30






WILL increase road-noise a little in a street car.

Mar 13, To replace the subframe bushings: Remove 4 bolt bolts holding subframe to diff, and 4 bolts+nuts holding trailing arms to the subframe. Remove the stock subframe bushing by making this setup on a bench vise: The sockets go in these slits. Have a helper hold the subframe while you set everything up.

Aug 01, When removing the rear subframe on an E30, there is always a possibility that either of the two old bushings will be oxidized and therefore seized/stuck in the body.

The OE subframe bushings are made up of an aluminum sleeve with a thick rubber coating around it. The aluminum sleeve protrudes at the top of the bushing and seats into the body during installation. To understand why its. BMW e30 rear subframe bushing removel and install. BMW e30 rear subframe bushing removel and install.

WILL increase road-noise a little in a street car.

pull down on the crossmember while lowering the tranny jack - you need about 2 inches of clearance at the top. insert the 36 (or 48) inch rod though bushing but not into the car. install a flat washer and a nut at the top; ensure a couple of rod threads are through the nut - for safety's sake.

slide the slide hammer weight onto. The back end of the E30, including the Drivetrain and the Brakes, are all mounted to one piece of metal known as the Rear shrubdisposal.buzz subframe is held in place with two bolts, cushioned with rubber bushes. Over time, these bushes will perish and fail, leaving you with sloppy suspension, four-wheel steering and some very suspicious knocking sounds.

Instruction Lookup.

To get your driving experience back to how. Dec 31, Glad to be of help; a minor correction - I meant to say in the post you can drop the whole rear suspension assembly when you free the rear-subframe-bushing nuts, and the diff-bushing bolt.I edited the post to say what I meant, instead of the trailing arm bolts - obviously you'd leave the trailing arms attached until you have the subframe free. BMW E30 Rear End Overhaul Subframe Bushings and Rear Trailing Arm BushingsStay Tuned for More!

The standard subframe bushing kit does not change camber (better for a track application). Comes with a lifetime warranty. Fits BMW 3 Series E30 (,& M3) DOES NOT FIT iX model).

These replace OEM part number.